Auto Module Lab logoAUTO MODULELAB
IDAHO · MAIL-IN SERVICE

Ford DPS6 PowerShift TCM Clone in Idaho

Ship your module from Boise or anywhere in Idaho — we typically complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$250 flat Fast Turnaround ~3 day USPS from ID
Text Before You Buy

Why Idaho customers mail in ford dps6 powershift tcm clone

Idaho has roughly 1.9 million registered vehicles, and full-size pickups & 4x4 SUVs make up much of what Boise-area shops and owners mail us. Domestic work like ford dps6 powershift tcm clone runs high-volume across Idaho — we see a steady stream out of Boise, Nampa, Idaho Falls. Cross-country northwest — about 3 days each way.

Metros we serve in Idaho

BoiseNampaIdaho FallsCoeur d'Alene

Idaho at a glance

  • ~1.9M registered vehicles statewide
  • Most common: full-size pickups & 4x4 SUVs
  • Idaho requires emissions testing only in the Treasure Valley (Ada and Canyon counties); the rest of the state is exempt.

What you get

  • Your original TCM's VIN, calibration, and stored clutch-adaptation data cloned onto the donor, where the original responds
  • Or a used / new donor TCM bench-programmed to your VIN and calibration when the original is dead
  • Donor part-number compatibility verified by VIN and module label before you ship
  • Bench read + verify of both units before anything is written
  • Bench communication test on a stable, regulated power supply before return
  • Clear install notes — including the clutch relearn / adaptation to complete at the car
  • Modules returned with tracking — return-shipping speed your choice at checkout

Shipping timeline — Idaho ↔ Arlington TX

USPS Priority routes northwest through the Mountain network; about 3 days given the distance. Typical round-trip from Boise or anywhere in Idaho:

  1. Day 0

    You ship

    USPS Priority from ID, ~$12

  2. Day 3

    We receive

    Workshop opens + inspects

  3. Day 4

    Work done

    Typical 24-hour bench turnaround

  4. ~Day 7

    Back to you

    Return speed you chose at checkout

Idaho FAQ

Common questions from customers shipping from Idaho.

How long does shipping take from Idaho to your Arlington TX workshop?
USPS Priority Mail from Boise, ID reaches our Arlington workshop in about 3 business days. USPS Priority routes northwest through the Mountain network; about 3 days given the distance. We start work the same day your module arrives and typically ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from Idaho?
USPS Priority flat-rate from Idaho to Arlington TX runs about $12. The customer pays shipping to us; return shipping back to Idaho is selected at checkout — $24.95 standard (3-5 business days), $54.95 UPS 2-Day, or $94.95 UPS Next Day Air, flat nationwide. Cross-country northwest — about 3 days each way.
Do you accept ford dps6 powershift tcm clone modules from Idaho?
Yes — we receive modules from Boise, Nampa, Idaho Falls, Coeur d'Alene and the rest of Idaho regularly. With about 1.9 million registered vehicles statewide, full-size pickups & 4x4 SUVs are the bulk of what we see from Idaho.
Is there a ford dps6 powershift tcm clone shop in Boise I should use instead?
Most Boise shops don't keep the bench equipment for ford dps6 powershift tcm clone — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Cross-country northwest — about 3 days each way.
Does Idaho vehicle inspection or emissions testing affect this service?
Idaho requires emissions testing only in the Treasure Valley (Ada and Canyon counties); the rest of the state is exempt. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all Idaho and federal requirements.
What is the clutch relearn / adaptation, and do I have to do it?
Yes. A dry dual-clutch transmission constantly learns exactly where each clutch begins to grip (the touch point) and adjusts engagement to it. After a TCM install, that adaptation is either freshly transferred or reset, so the transmission re-learns the touch points over normal driving — and on these cars a proper adaptation with Ford-capable software after install gives the smoothest result. We include clear notes on what to expect.
Does this cover other Ford dual-clutch transmissions?
This listing is specifically for the 6-speed DPS6 PowerShift in the Focus and Fiesta. Other Ford dual-clutch and automated units use different modules and procedures. Send us your VIN and TCM label photo anyway — we handle other Ford transmission controllers case-by-case and will point you to the right service or a quote.

Full details

See the complete Ford DPS6 PowerShift TCM Clone service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareFloridaGeorgiaHawaiiIllinoisIndianaIowaKansasKentuckyLouisianaMaineMarylandMassachusetts

Ship from Idaho today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Boise: about a week.

(817) 678-3252