Auto Module Lab logoAUTO MODULELAB
MONTANA · MAIL-IN SERVICE

Ford DPS6 PowerShift TCM Clone in Montana

Ship your module from Billings or anywhere in Montana — we typically complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$250 flat Fast Turnaround ~3 day USPS from MT
Text Before You Buy

Why Montana customers mail in ford dps6 powershift tcm clone

Montana has roughly 1.7 million registered vehicles, and full-size pickups & 4x4 SUVs make up much of what Billings-area shops and owners mail us. Domestic work like ford dps6 powershift tcm clone runs high-volume across Montana — we see a steady stream out of Billings, Missoula, Great Falls. Cross-country northwest — about 3 days each way.

Metros we serve in Montana

BillingsMissoulaGreat FallsBozeman

Montana at a glance

  • ~1.7M registered vehicles statewide
  • Most common: full-size pickups & 4x4 SUVs
  • Montana has no statewide periodic vehicle safety or emissions inspection program.

What you get

  • Your original TCM's VIN, calibration, and stored clutch-adaptation data cloned onto the donor, where the original responds
  • Or a used / new donor TCM bench-programmed to your VIN and calibration when the original is dead
  • Donor part-number compatibility verified by VIN and module label before you ship
  • Bench read + verify of both units before anything is written
  • Bench communication test on a stable, regulated power supply before return
  • Clear install notes — including the clutch relearn / adaptation to complete at the car
  • Modules returned with tracking — return-shipping speed your choice at checkout

Shipping timeline — Montana ↔ Arlington TX

USPS Priority routes northwest through the Mountain network; about 3 days given the distance. Typical round-trip from Billings or anywhere in Montana:

  1. Day 0

    You ship

    USPS Priority from MT, ~$13

  2. Day 3

    We receive

    Workshop opens + inspects

  3. Day 4

    Work done

    Typical 24-hour bench turnaround

  4. ~Day 7

    Back to you

    Return speed you chose at checkout

Montana FAQ

Common questions from customers shipping from Montana.

How long does shipping take from Montana to your Arlington TX workshop?
USPS Priority Mail from Billings, MT reaches our Arlington workshop in about 3 business days. USPS Priority routes northwest through the Mountain network; about 3 days given the distance. We start work the same day your module arrives and typically ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from Montana?
USPS Priority flat-rate from Montana to Arlington TX runs about $13. The customer pays shipping to us; return shipping back to Montana is selected at checkout — $24.95 standard (3-5 business days), $54.95 UPS 2-Day, or $94.95 UPS Next Day Air, flat nationwide. Cross-country northwest — about 3 days each way.
Do you accept ford dps6 powershift tcm clone modules from Montana?
Yes — we receive modules from Billings, Missoula, Great Falls, Bozeman and the rest of Montana regularly. With about 1.7 million registered vehicles statewide, full-size pickups & 4x4 SUVs are the bulk of what we see from Montana.
Is there a ford dps6 powershift tcm clone shop in Billings I should use instead?
Most Billings shops don't keep the bench equipment for ford dps6 powershift tcm clone — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Cross-country northwest — about 3 days each way.
Does Montana vehicle inspection or emissions testing affect this service?
Montana has no statewide periodic vehicle safety or emissions inspection program. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all Montana and federal requirements.
Will the cloned module be plug-and-play?
On supported applications, yes — the donor carries your original's VIN, calibration, and clutch adaptation, so it installs without a dealer programming trip. Two honest caveats: the donor TCM must match your Ford part number, and after install the transmission runs a clutch relearn / adaptation so it can re-learn the clutch touch points. That relearn is normal after any TCM or clutch service and completes over a short drive.
My original TCM is completely dead — can you still program a donor?
Yes — that becomes used-TCM programming: we bench-write the correct factory calibration for your VIN onto the donor, and the clutch relearn / adaptation is finished at the car. You lose nothing except the original's stored clutch adaptation, which the transmission re-learns on its own during the drive-cycle relearn after install.

Full details

See the complete Ford DPS6 PowerShift TCM Clone service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMaryland

Ship from Montana today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Billings: about a week.

(817) 678-3252