Auto Module Lab logoAUTO MODULELAB
NEW HAMPSHIRE · MAIL-IN SERVICE

Ford DPS6 PowerShift TCM Clone in New Hampshire

Ship your module from Manchester or anywhere in New Hampshire — we typically complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$250 flat Fast Turnaround ~3 day USPS from NH
Text Before You Buy

Why New Hampshire customers mail in ford dps6 powershift tcm clone

New Hampshire has roughly 1.3 million registered vehicles, and trucks & 4x4 SUVs make up much of what Manchester-area shops and owners mail us. Domestic work like ford dps6 powershift tcm clone runs high-volume across New Hampshire — we see a steady stream out of Manchester, Nashua, Concord. Cross-country northeast — about 3 days each way.

Metros we serve in New Hampshire

ManchesterNashuaConcordDover

New Hampshire at a glance

  • ~1.3M registered vehicles statewide
  • Most common: trucks & 4x4 SUVs
  • New Hampshire requires an annual safety inspection statewide, with OBD-II emissions testing for newer model years.

What you get

  • Your original TCM's VIN, calibration, and stored clutch-adaptation data cloned onto the donor, where the original responds
  • Or a used / new donor TCM bench-programmed to your VIN and calibration when the original is dead
  • Donor part-number compatibility verified by VIN and module label before you ship
  • Bench read + verify of both units before anything is written
  • Bench communication test on a stable, regulated power supply before return
  • Clear install notes — including the clutch relearn / adaptation to complete at the car
  • Modules returned with tracking — return-shipping speed your choice at checkout

Shipping timeline — New Hampshire ↔ Arlington TX

USPS Priority routes northeast through the New England network; typically 3 days. Typical round-trip from Manchester or anywhere in New Hampshire:

  1. Day 0

    You ship

    USPS Priority from NH, ~$13

  2. Day 3

    We receive

    Workshop opens + inspects

  3. Day 4

    Work done

    Typical 24-hour bench turnaround

  4. ~Day 7

    Back to you

    Return speed you chose at checkout

New Hampshire FAQ

Common questions from customers shipping from New Hampshire.

How long does shipping take from New Hampshire to your Arlington TX workshop?
USPS Priority Mail from Manchester, NH reaches our Arlington workshop in about 3 business days. USPS Priority routes northeast through the New England network; typically 3 days. We start work the same day your module arrives and typically ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from New Hampshire?
USPS Priority flat-rate from New Hampshire to Arlington TX runs about $13. The customer pays shipping to us; return shipping back to New Hampshire is selected at checkout — $24.95 standard (3-5 business days), $54.95 UPS 2-Day, or $94.95 UPS Next Day Air, flat nationwide. Cross-country northeast — about 3 days each way.
Do you accept ford dps6 powershift tcm clone modules from New Hampshire?
Yes — we receive modules from Manchester, Nashua, Concord, Dover and the rest of New Hampshire regularly. With about 1.3 million registered vehicles statewide, trucks & 4x4 SUVs are the bulk of what we see from New Hampshire.
Is there a ford dps6 powershift tcm clone shop in Manchester I should use instead?
Most Manchester shops don't keep the bench equipment for ford dps6 powershift tcm clone — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Cross-country northeast — about 3 days each way.
Does New Hampshire vehicle inspection or emissions testing affect this service?
New Hampshire requires an annual safety inspection statewide, with OBD-II emissions testing for newer model years. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all New Hampshire and federal requirements.
Do you supply the donor TCM?
No — you source a matching used or new DPS6 TCM (dealer, salvage yard, or a reputable parts recycler) and we verify compatibility before you buy or ship. Match the Ford part number on the label as closely as possible; send us photos of both labels plus your VIN and a technician confirms the pair will work, free.
What is the clutch relearn / adaptation, and do I have to do it?
Yes. A dry dual-clutch transmission constantly learns exactly where each clutch begins to grip (the touch point) and adjusts engagement to it. After a TCM install, that adaptation is either freshly transferred or reset, so the transmission re-learns the touch points over normal driving — and on these cars a proper adaptation with Ford-capable software after install gives the smoothest result. We include clear notes on what to expect.

Full details

See the complete Ford DPS6 PowerShift TCM Clone service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMaryland

Ship from New Hampshire today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Manchester: about a week.

(817) 678-3252