Auto Module Lab logoAUTO MODULELAB
NORTH CAROLINA · MAIL-IN SERVICE

Ford DPS6 PowerShift TCM Clone in North Carolina

Ship your module from Charlotte or anywhere in North Carolina — we typically complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$250 flat Fast Turnaround ~2-3 day USPS from NC
Text Before You Buy

Why North Carolina customers mail in ford dps6 powershift tcm clone

North Carolina has roughly 8.4 million registered vehicles, and trucks, SUVs & imports make up much of what Charlotte-area shops and owners mail us. Domestic work like ford dps6 powershift tcm clone runs high-volume across North Carolina — we see a steady stream out of Charlotte, Raleigh, Greensboro. Cross-region southeast — about 2-3 days each way.

Metros we serve in North Carolina

CharlotteRaleighGreensboroDurham

North Carolina at a glance

  • ~8.4M registered vehicles statewide
  • Most common: trucks, SUVs & imports
  • North Carolina requires an annual safety inspection statewide, with OBD-II emissions testing in a set of more populous counties.

What you get

  • Your original TCM's VIN, calibration, and stored clutch-adaptation data cloned onto the donor, where the original responds
  • Or a used / new donor TCM bench-programmed to your VIN and calibration when the original is dead
  • Donor part-number compatibility verified by VIN and module label before you ship
  • Bench read + verify of both units before anything is written
  • Bench communication test on a stable, regulated power supply before return
  • Clear install notes — including the clutch relearn / adaptation to complete at the car
  • Modules returned with tracking — return-shipping speed your choice at checkout

Shipping timeline — North Carolina ↔ Arlington TX

USPS Priority routes east through the Southeast network; usually 2-3 days. Typical round-trip from Charlotte or anywhere in North Carolina:

  1. Day 0

    You ship

    USPS Priority from NC, ~$12

  2. Day 2-3

    We receive

    Workshop opens + inspects

  3. Day 3

    Work done

    Typical 24-hour bench turnaround

  4. ~Day 7

    Back to you

    Return speed you chose at checkout

North Carolina FAQ

Common questions from customers shipping from North Carolina.

How long does shipping take from North Carolina to your Arlington TX workshop?
USPS Priority Mail from Charlotte, NC reaches our Arlington workshop in about 2-3 business days. USPS Priority routes east through the Southeast network; usually 2-3 days. We start work the same day your module arrives and typically ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from North Carolina?
USPS Priority flat-rate from North Carolina to Arlington TX runs about $12. The customer pays shipping to us; return shipping back to North Carolina is selected at checkout — $24.95 standard (3-5 business days), $54.95 UPS 2-Day, or $94.95 UPS Next Day Air, flat nationwide. Cross-region southeast — about 2-3 days each way.
Do you accept ford dps6 powershift tcm clone modules from North Carolina?
Yes — we receive modules from Charlotte, Raleigh, Greensboro, Durham and the rest of North Carolina regularly. With about 8.4 million registered vehicles statewide, trucks, SUVs & imports are the bulk of what we see from North Carolina.
Is there a ford dps6 powershift tcm clone shop in Charlotte I should use instead?
Most Charlotte shops don't keep the bench equipment for ford dps6 powershift tcm clone — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Cross-region southeast — about 2-3 days each way.
Does North Carolina vehicle inspection or emissions testing affect this service?
North Carolina requires an annual safety inspection statewide, with OBD-II emissions testing in a set of more populous counties. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all North Carolina and federal requirements.
How much is it and how does the mail-in work?
It is $250 flat. After a technician verifies your VIN and both TCM part-number labels, you ship the units to Auto Module Lab in Arlington, TX. We clone or program the data on the bench, test communication, and ship both back with tracking — return speed your choice at checkout (Standard $24.95, UPS 2-Day $54.95, or UPS overnight $94.95). Inbound shipping to the lab is customer-paid with your choice of carrier.
What is a DPS6 and which cars have it?
The DPS6 is Ford's 6-speed PowerShift dry dual-clutch automated transmission — it drives like an automatic but uses two clutches instead of a torque converter. Ford fitted it to the 2011-2018 Focus and 2011-2019 Fiesta in North America. Its TCM (transmission control module, sometimes called the TCU) commands the clutches and shift-fork actuators. Send your VIN and a photo of the TCM label and we confirm your exact application before you ship.

Full details

See the complete Ford DPS6 PowerShift TCM Clone service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMaryland

Ship from North Carolina today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Charlotte: about a week.

(817) 678-3252