Auto Module Lab logoAUTO MODULELAB
OKLAHOMA · MAIL-IN SERVICE

Ford DPS6 PowerShift TCM Clone in Oklahoma

Ship your module from Oklahoma City or anywhere in Oklahoma — we typically complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$250 flat Fast Turnaround ~1 day USPS from OK
Text Before You Buy

Why Oklahoma customers mail in ford dps6 powershift tcm clone

Oklahoma has roughly 3.6 million registered vehicles, and full-size pickups & SUVs make up much of what Oklahoma City-area shops and owners mail us. Domestic work like ford dps6 powershift tcm clone runs high-volume across Oklahoma — we see a steady stream out of Oklahoma City, Tulsa, Norman. Neighboring state — typically 1 day each way, the fastest non-Texas round-trip.

Metros we serve in Oklahoma

Oklahoma CityTulsaNormanBroken Arrow

Oklahoma at a glance

  • ~3.6M registered vehicles statewide
  • Most common: full-size pickups & SUVs
  • Oklahoma has no statewide periodic vehicle safety or emissions inspection program.

What you get

  • Your original TCM's VIN, calibration, and stored clutch-adaptation data cloned onto the donor, where the original responds
  • Or a used / new donor TCM bench-programmed to your VIN and calibration when the original is dead
  • Donor part-number compatibility verified by VIN and module label before you ship
  • Bench read + verify of both units before anything is written
  • Bench communication test on a stable, regulated power supply before return
  • Clear install notes — including the clutch relearn / adaptation to complete at the car
  • Modules returned with tracking — return-shipping speed your choice at checkout

Shipping timeline — Oklahoma ↔ Arlington TX

USPS Priority is a quick hop north from the North Texas network; often next-day. Typical round-trip from Oklahoma City or anywhere in Oklahoma:

  1. Day 0

    You ship

    USPS Priority from OK, ~$9

  2. Day 1

    We receive

    Workshop opens + inspects

  3. Day 2

    Work done

    Typical 24-hour bench turnaround

  4. ~Day 3

    Back to you

    Return speed you chose at checkout

Oklahoma FAQ

Common questions from customers shipping from Oklahoma.

How long does shipping take from Oklahoma to your Arlington TX workshop?
USPS Priority Mail from Oklahoma City, OK reaches our Arlington workshop in about 1 business day. USPS Priority is a quick hop north from the North Texas network; often next-day. We start work the same day your module arrives and typically ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from Oklahoma?
USPS Priority flat-rate from Oklahoma to Arlington TX runs about $9. The customer pays shipping to us; return shipping back to Oklahoma is selected at checkout — $24.95 standard (3-5 business days), $54.95 UPS 2-Day, or $94.95 UPS Next Day Air, flat nationwide. Neighboring state — typically 1 day each way, the fastest non-Texas round-trip.
Do you accept ford dps6 powershift tcm clone modules from Oklahoma?
Yes — we receive modules from Oklahoma City, Tulsa, Norman, Broken Arrow and the rest of Oklahoma regularly. With about 3.6 million registered vehicles statewide, full-size pickups & SUVs are the bulk of what we see from Oklahoma.
Is there a ford dps6 powershift tcm clone shop in Oklahoma City I should use instead?
Most Oklahoma City shops don't keep the bench equipment for ford dps6 powershift tcm clone — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Neighboring state — typically 1 day each way, the fastest non-Texas round-trip.
Does Oklahoma vehicle inspection or emissions testing affect this service?
Oklahoma has no statewide periodic vehicle safety or emissions inspection program. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all Oklahoma and federal requirements.
Does this cover other Ford dual-clutch transmissions?
This listing is specifically for the 6-speed DPS6 PowerShift in the Focus and Fiesta. Other Ford dual-clutch and automated units use different modules and procedures. Send us your VIN and TCM label photo anyway — we handle other Ford transmission controllers case-by-case and will point you to the right service or a quote.
How much is it and how does the mail-in work?
It is $250 flat. After a technician verifies your VIN and both TCM part-number labels, you ship the units to Auto Module Lab in Arlington, TX. We clone or program the data on the bench, test communication, and ship both back with tracking — return speed your choice at checkout (Standard $24.95, UPS 2-Day $54.95, or UPS overnight $94.95). Inbound shipping to the lab is customer-paid with your choice of carrier.

Full details

See the complete Ford DPS6 PowerShift TCM Clone service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMaryland

Ship from Oklahoma today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Oklahoma City: about a week.

(817) 678-3252