Auto Module Lab logoAUTO MODULELAB
PENNSYLVANIA · MAIL-IN SERVICE

Ford DPS6 PowerShift TCM Clone in Pennsylvania

Ship your module from Philadelphia or anywhere in Pennsylvania — we typically complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$250 flat Fast Turnaround ~3 day USPS from PA
Text Before You Buy

Why Pennsylvania customers mail in ford dps6 powershift tcm clone

Pennsylvania has roughly 10 million registered vehicles, and trucks, SUVs & imports make up much of what Philadelphia-area shops and owners mail us. Domestic work like ford dps6 powershift tcm clone runs high-volume across Pennsylvania — we see a steady stream out of Philadelphia, Pittsburgh, Allentown. Cross-country northeast — about 3 days each way.

Metros we serve in Pennsylvania

PhiladelphiaPittsburghAllentownHarrisburg

Pennsylvania at a glance

  • ~10M registered vehicles statewide
  • Most common: trucks, SUVs & imports
  • Pennsylvania requires an annual safety inspection statewide, with emissions testing in 25 of the more populous counties.

What you get

  • Your original TCM's VIN, calibration, and stored clutch-adaptation data cloned onto the donor, where the original responds
  • Or a used / new donor TCM bench-programmed to your VIN and calibration when the original is dead
  • Donor part-number compatibility verified by VIN and module label before you ship
  • Bench read + verify of both units before anything is written
  • Bench communication test on a stable, regulated power supply before return
  • Clear install notes — including the clutch relearn / adaptation to complete at the car
  • Modules returned with tracking — return-shipping speed your choice at checkout

Shipping timeline — Pennsylvania ↔ Arlington TX

USPS Priority routes northeast through the Mid-Atlantic network; typically 3 days. Typical round-trip from Philadelphia or anywhere in Pennsylvania:

  1. Day 0

    You ship

    USPS Priority from PA, ~$13

  2. Day 3

    We receive

    Workshop opens + inspects

  3. Day 4

    Work done

    Typical 24-hour bench turnaround

  4. ~Day 7

    Back to you

    Return speed you chose at checkout

Pennsylvania FAQ

Common questions from customers shipping from Pennsylvania.

How long does shipping take from Pennsylvania to your Arlington TX workshop?
USPS Priority Mail from Philadelphia, PA reaches our Arlington workshop in about 3 business days. USPS Priority routes northeast through the Mid-Atlantic network; typically 3 days. We start work the same day your module arrives and typically ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from Pennsylvania?
USPS Priority flat-rate from Pennsylvania to Arlington TX runs about $13. The customer pays shipping to us; return shipping back to Pennsylvania is selected at checkout — $24.95 standard (3-5 business days), $54.95 UPS 2-Day, or $94.95 UPS Next Day Air, flat nationwide. Cross-country northeast — about 3 days each way.
Do you accept ford dps6 powershift tcm clone modules from Pennsylvania?
Yes — we receive modules from Philadelphia, Pittsburgh, Allentown, Harrisburg and the rest of Pennsylvania regularly. With about 10 million registered vehicles statewide, trucks, SUVs & imports are the bulk of what we see from Pennsylvania.
Is there a ford dps6 powershift tcm clone shop in Philadelphia I should use instead?
Most Philadelphia shops don't keep the bench equipment for ford dps6 powershift tcm clone — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Cross-country northeast — about 3 days each way.
Does Pennsylvania vehicle inspection or emissions testing affect this service?
Pennsylvania requires an annual safety inspection statewide, with emissions testing in 25 of the more populous counties. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all Pennsylvania and federal requirements.
What is a DPS6 and which cars have it?
The DPS6 is Ford's 6-speed PowerShift dry dual-clutch automated transmission — it drives like an automatic but uses two clutches instead of a torque converter. Ford fitted it to the 2011-2018 Focus and 2011-2019 Fiesta in North America. Its TCM (transmission control module, sometimes called the TCU) commands the clutches and shift-fork actuators. Send your VIN and a photo of the TCM label and we confirm your exact application before you ship.
My car shudders and the dealer blames the clutch — will cloning fix that?
No, and we'll be straight with you about it. Shudder and rough engagement on a DPS6 almost always come from worn dry clutches or shift-fork actuators, which are mechanical parts — a control-module clone does not repair them. Cloning solves the electronic side: a dead TCM, a used TCM carrying the wrong identity, or a module-fault warning. Describe your exact symptoms when you contact us and we'll help you tell a module problem from a clutch problem before you spend anything.

Full details

See the complete Ford DPS6 PowerShift TCM Clone service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMaryland

Ship from Pennsylvania today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Philadelphia: about a week.

(817) 678-3252