Auto Module Lab logoAUTO MODULELAB
RHODE ISLAND · MAIL-IN SERVICE

Ford DPS6 PowerShift TCM Clone in Rhode Island

Ship your module from Providence or anywhere in Rhode Island — we typically complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$250 flat Fast Turnaround ~3 day USPS from RI
Text Before You Buy

Why Rhode Island customers mail in ford dps6 powershift tcm clone

Rhode Island has roughly 0.8 million registered vehicles, and European luxury (BMW, Mercedes, Audi) make up much of what Providence-area shops and owners mail us. Domestic work like ford dps6 powershift tcm clone runs high-volume across Rhode Island — we see a steady stream out of Providence, Warwick, Cranston. Cross-country northeast — about 3 days each way.

Metros we serve in Rhode Island

ProvidenceWarwickCranstonPawtucket

Rhode Island at a glance

  • ~0.8M registered vehicles statewide
  • Most common: European luxury (BMW, Mercedes, Audi)
  • Rhode Island requires a biennial combined safety and OBD-II emissions inspection statewide.

What you get

  • Your original TCM's VIN, calibration, and stored clutch-adaptation data cloned onto the donor, where the original responds
  • Or a used / new donor TCM bench-programmed to your VIN and calibration when the original is dead
  • Donor part-number compatibility verified by VIN and module label before you ship
  • Bench read + verify of both units before anything is written
  • Bench communication test on a stable, regulated power supply before return
  • Clear install notes — including the clutch relearn / adaptation to complete at the car
  • Modules returned with tracking — return-shipping speed your choice at checkout

Shipping timeline — Rhode Island ↔ Arlington TX

USPS Priority routes northeast through the New England network; typically 3 days. Typical round-trip from Providence or anywhere in Rhode Island:

  1. Day 0

    You ship

    USPS Priority from RI, ~$13

  2. Day 3

    We receive

    Workshop opens + inspects

  3. Day 4

    Work done

    Typical 24-hour bench turnaround

  4. ~Day 7

    Back to you

    Return speed you chose at checkout

Rhode Island FAQ

Common questions from customers shipping from Rhode Island.

How long does shipping take from Rhode Island to your Arlington TX workshop?
USPS Priority Mail from Providence, RI reaches our Arlington workshop in about 3 business days. USPS Priority routes northeast through the New England network; typically 3 days. We start work the same day your module arrives and typically ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from Rhode Island?
USPS Priority flat-rate from Rhode Island to Arlington TX runs about $13. The customer pays shipping to us; return shipping back to Rhode Island is selected at checkout — $24.95 standard (3-5 business days), $54.95 UPS 2-Day, or $94.95 UPS Next Day Air, flat nationwide. Cross-country northeast — about 3 days each way.
Do you accept ford dps6 powershift tcm clone modules from Rhode Island?
Yes — we receive modules from Providence, Warwick, Cranston, Pawtucket and the rest of Rhode Island regularly. With about 0.8 million registered vehicles statewide, European luxury (BMW, Mercedes, Audi) are the bulk of what we see from Rhode Island.
Is there a ford dps6 powershift tcm clone shop in Providence I should use instead?
Most Providence shops don't keep the bench equipment for ford dps6 powershift tcm clone — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Cross-country northeast — about 3 days each way.
Does Rhode Island vehicle inspection or emissions testing affect this service?
Rhode Island requires a biennial combined safety and OBD-II emissions inspection statewide. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all Rhode Island and federal requirements.
Does this cover other Ford dual-clutch transmissions?
This listing is specifically for the 6-speed DPS6 PowerShift in the Focus and Fiesta. Other Ford dual-clutch and automated units use different modules and procedures. Send us your VIN and TCM label photo anyway — we handle other Ford transmission controllers case-by-case and will point you to the right service or a quote.
How much is it and how does the mail-in work?
It is $250 flat. After a technician verifies your VIN and both TCM part-number labels, you ship the units to Auto Module Lab in Arlington, TX. We clone or program the data on the bench, test communication, and ship both back with tracking — return speed your choice at checkout (Standard $24.95, UPS 2-Day $54.95, or UPS overnight $94.95). Inbound shipping to the lab is customer-paid with your choice of carrier.

Full details

See the complete Ford DPS6 PowerShift TCM Clone service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMaryland

Ship from Rhode Island today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Providence: about a week.

(817) 678-3252