Auto Module Lab logoAUTO MODULELAB
WYOMING · MAIL-IN SERVICE

Ford DPS6 PowerShift TCM Clone in Wyoming

Ship your module from Cheyenne or anywhere in Wyoming — we typically complete the work in 24 hours and ship it back at the return speed you choose at checkout — standard to overnight.

$250 flat Fast Turnaround ~2-3 day USPS from WY
Text Before You Buy

Why Wyoming customers mail in ford dps6 powershift tcm clone

Wyoming has roughly 0.9 million registered vehicles, and full-size pickups & 4x4 SUVs make up much of what Cheyenne-area shops and owners mail us. Domestic work like ford dps6 powershift tcm clone runs high-volume across Wyoming — we see a steady stream out of Cheyenne, Casper, Laramie. Cross-region northwest — about 2-3 days each way.

Metros we serve in Wyoming

CheyenneCasperLaramieGillette

Wyoming at a glance

  • ~0.9M registered vehicles statewide
  • Most common: full-size pickups & 4x4 SUVs
  • Wyoming has no statewide periodic vehicle safety or emissions inspection program.

What you get

  • Your original TCM's VIN, calibration, and stored clutch-adaptation data cloned onto the donor, where the original responds
  • Or a used / new donor TCM bench-programmed to your VIN and calibration when the original is dead
  • Donor part-number compatibility verified by VIN and module label before you ship
  • Bench read + verify of both units before anything is written
  • Bench communication test on a stable, regulated power supply before return
  • Clear install notes — including the clutch relearn / adaptation to complete at the car
  • Modules returned with tracking — return-shipping speed your choice at checkout

Shipping timeline — Wyoming ↔ Arlington TX

USPS Priority routes northwest through the Mountain network; usually 2-3 days given the distance. Typical round-trip from Cheyenne or anywhere in Wyoming:

  1. Day 0

    You ship

    USPS Priority from WY, ~$11

  2. Day 2-3

    We receive

    Workshop opens + inspects

  3. Day 3

    Work done

    Typical 24-hour bench turnaround

  4. ~Day 7

    Back to you

    Return speed you chose at checkout

Wyoming FAQ

Common questions from customers shipping from Wyoming.

How long does shipping take from Wyoming to your Arlington TX workshop?
USPS Priority Mail from Cheyenne, WY reaches our Arlington workshop in about 2-3 business days. USPS Priority routes northwest through the Mountain network; usually 2-3 days given the distance. We start work the same day your module arrives and typically ship back next business day at the return speed you chose at checkout.
How much does it cost to ship a module from Wyoming?
USPS Priority flat-rate from Wyoming to Arlington TX runs about $11. The customer pays shipping to us; return shipping back to Wyoming is selected at checkout — $24.95 standard (3-5 business days), $54.95 UPS 2-Day, or $94.95 UPS Next Day Air, flat nationwide. Cross-region northwest — about 2-3 days each way.
Do you accept ford dps6 powershift tcm clone modules from Wyoming?
Yes — we receive modules from Cheyenne, Casper, Laramie, Gillette and the rest of Wyoming regularly. With about 0.9 million registered vehicles statewide, full-size pickups & 4x4 SUVs are the bulk of what we see from Wyoming.
Is there a ford dps6 powershift tcm clone shop in Cheyenne I should use instead?
Most Cheyenne shops don't keep the bench equipment for ford dps6 powershift tcm clone — they'd forward the module to a specialist anyway, which adds a markup and a middleman. Going direct to us is usually faster and cheaper. Cross-region northwest — about 2-3 days each way.
Does Wyoming vehicle inspection or emissions testing affect this service?
Wyoming has no statewide periodic vehicle safety or emissions inspection program. Our service is bench module programming only — you remain responsible for your vehicle's compliance with all Wyoming and federal requirements.
What is a DPS6 and which cars have it?
The DPS6 is Ford's 6-speed PowerShift dry dual-clutch automated transmission — it drives like an automatic but uses two clutches instead of a torque converter. Ford fitted it to the 2011-2018 Focus and 2011-2019 Fiesta in North America. Its TCM (transmission control module, sometimes called the TCU) commands the clutches and shift-fork actuators. Send your VIN and a photo of the TCM label and we confirm your exact application before you ship.
My car shudders and the dealer blames the clutch — will cloning fix that?
No, and we'll be straight with you about it. Shudder and rough engagement on a DPS6 almost always come from worn dry clutches or shift-fork actuators, which are mechanical parts — a control-module clone does not repair them. Cloning solves the electronic side: a dead TCM, a used TCM carrying the wrong identity, or a module-fault warning. Describe your exact symptoms when you contact us and we'll help you tell a module problem from a clutch problem before you spend anything.

Full details

See the complete Ford DPS6 PowerShift TCM Clone service page

Compatibility list, what it fixes / doesn't fix, shipping instructions, warranty.

Full Service Page

Same service from other states:

AlabamaAlaskaArizonaArkansasCaliforniaColoradoConnecticutDelawareFloridaGeorgiaHawaiiIdahoIllinoisIndianaIowaKansasKentuckyLouisianaMaineMaryland

Ship from Wyoming today

Pay now, get the Arlington TX shipping address by email, drop it in the mail. Full round-trip from Cheyenne: about a week.

(817) 678-3252